Shop Menu
Custom Foam Packaging
Pick & Pluck Foam
Neoprene Foam
Microcell Foam
Volara Foam
Polyethylene Foam
Standard Back Rods
Outdoor Foam
Insuilte Flotation Foam
Polystyrene Replacement
Polystyrene Crown Molding
Polystyrene Arts & Crafts
Custom Foam Cutting
 
FoamExpress1.com

Insulite Foam design for the Boat industry! 
A grate choice for Boats, Marinas, Patios, Pools, Seat Pads, Yards
* Isolation : Steel from Masonry            * Metal from metal (curtain walls ect.)

Insulite With Adhesive Glue is available

To secure the sealing of joints and seams, this glue adhesive backing is strong and is suitable for formica and can stick on rubber, glass, leather, wood, spong, plastic, paper, cement and fabric, and other surfaces. Just cut to size and peel off the backing, it is that easy! If you would like a sample please call or e-mail us.

* Closed Cell Expanded Polyvinyl Chloride, Good Tensile
* Good Chemical Resistance & Temperature serviceability

Description
Tan OR Black Color
1/2" Thick 1-1/8" Thick 1-5/8" Thick
2 layers glued together
2-1/4" Thick
2 layers glued together
 Lineal Ft x 58" Wide $ 6.50 per foot $ 8.50 per foot $ 14.00 per foot $ 18.00 per foot
96" long x 58" wide $ 38.00 $ 68.00 $ 116.00 $ 146.00
32ft x 58" wide ------- $ 228.00 ------- -------
(6) ROLLS 32ft x 58" wide ------- $ 195.00 x 6 ROLLS ------- -------

Please email us with your zip code and what size for shipping.

 

Insulite Foam:
Common Uses: Boats, Marinas, Patios, Pools, Seat Pads, Yards,
Isolation Steel from Masonry, Metal from metal (curtain walls ect.)
Shipping Weight: .375lb.- Per 1" x 12" x 12"
Property Test Method Typical Values
Density ASTM D- 1667 3.5 p.c.f
Compression Deflection 25% ASTM D- 1056 1.5 - 3.0 psi
Comp. Set 25% ASTM D- 1056 24% max
Comp. Set 50%
(sample size 1" x 2" x 2")
ASTM D- 1056
(ASTM D- 1667)
50% max
(15% max*)
Tensile ASTM D- 412 40 min.
Elongation ASTM D- 412 100% min
Water Absorption ASTM D- 1056 10% max wt.
Heat Aging ASTM D- 1056
(22 hrs. @ 158 F)
+/-30%
Thermal Stability ASTM D- 548
(% change in length after 7 days @ 220F)
7% max wt.
Ozone Resistance ASTM D- 1171 Pass
Temperature
(Lower limit to upper limit)
-40F to 220F

 

1

Nomaco Black IUT 10

Soft Cellular Rubber Flotation Foam
designed for the Boat industry

Polymer- Vinyl Nitrile

Specifications:
ASTM-D-1056-67: SCE41
ASTM-D-1056-85: 2C1

Flammability:
UL94: VO1
FMVSS 302: Pass1

Physical Properties:
25% Compression Deflection (PSI): 1.5-3
Density (PCF): 3-4.5
Temp. Range degree Fahrenheit: -30/+175
Ozona Resistance: Good
A great choice for Boats, Marinas, Patios, Pools, Seat Pads, Yards.
* Isolation : Steel from Masonry     
* Metal from metal (curtain walls etc.)
* Closed Cell Expanded Polyvinyl Chloride, Good Tensile
* Good Chemical Resistance & Temperature serviceability

 

 
If you purchase more then one item shipping cost will be less.
To place an order you can email us.

Copyright 2016 © www.foamandfoam.com. All rights reserved.